Water repellency of ﬁbrous materials, plasterboard and wood, primer for painting
SurfaPore F is easily applied to ﬁbrous surfaces such as plasterboards, drywalls, wood and carton. It protects and waterproofs surfaces assuring that water or other corroding factors are eﬀectively repelled by chemical forces. The surfaces are protected by moisture, mould and microorganisms. It can also be used as a primer on plasterboards and drywalls, improving the adhesion of paints.
SurfaPore F is a water based liquid formulation which creates a thin layer on the modiﬁed surfaces, preventing water from penetrating. Because of its ﬂexibility, it reduces the swelling and cracking eﬀect. SurfaPore F has a prolonged lifespan and great resistance to UV radiation and weathering, while at the same time it is really cost eﬀective. Modiﬁed surfaces underly minimal change to the original natural appearance. Due to its composition, SurfaPore F can be used as a primer before painting, in surfaces such as plasterboards thereby improving the adhesion of paint on substrates.
Plasterboards, drywalls, carton, wood (tropical woods, softwoods, plywoods)
Surface Application: The application surface should be dry and clean. Apply SurfaPore F by using a brush or roller. No dilution is required. On very absorptive surfaces re-apply within 3 hours. Maximum water repellency is achieved 24 hours post application.
Consumption: Estimated consumption rate 8-10 m²/L, strongly dependant on the properties of the surface applied