Stains can destroy your valuable stone, marble and granite surfaces. SurfaPore M not only protects these surfaces from stains, but also makes them oil and water repellent as it coats the pores, without changing their appearance and enables them to actively repel oil based stains.
SurfaPore M is a water based formulation, speciﬁcally designed to harness the power of nanotechnology, in order to achieve both oil and water repellency on the surfaces applied. The core nano-sized particles, suitably engineered to ﬁt the pores of the applied surface, penetrate and “ﬂood” pores. After coating, water, oil or dirt fails to penetrate into the porosity of the substrate and permanent pore protection provides stain prooﬁng and easy cleaning properties. The application of SurfaPore M does not induce any visual change on the applied surface and does not block its breath-ability.
Absorptive marbles and granite, cement, natural stone, pavement, concrete, natural stone,
Surface Application: The application surface should be dry and clean. Apply SurfaPore M with brush, roller or spray gun. No dilution is required. For extra protection of very sensitive surfaces reapply, within 3 hours after the ﬁrst application.
Consumption: Estimated consumption rate 8-10 m²/L, strongly dependant on the absorption properties of the application surface.