SurfaPore W is a combination of active ingredients that repel water and oil stains providing excellent dimensional stability even in the most humid environment.
SurfaPore W is a water based formulation, speciﬁcally designed to harness the power of nanotechnology in order to preserve absorptive wooden surfaces. By making wood water resistant, it assures dimensional stability and protection against warping and decay. Additionally, it provides oil repellency in order to prevent oily stains from penetrating wood surfaces. SurfaPore W has been successfully used as an additive (10% dilution ratio) in pressure-treatment solutions to protect wood. The application of SurfaPore W does not induce any visible change on the surface applied and does not block the pores (no pore sealing like traditional varnishes or wood stains). Thus, the breathing ability of the natural wood surface is preserved.
Absorptive wooden surfaces: Fences/posts, roof shingles, garden furniture/sheds, decking & docks,fences/posts, facades, kitchen worktops, hard wood furniture,
Applicable on natural, absorptive wooden surfaces. Remove any varnish or wood stain residues before applying SurfaPore W. The application surface should be dry and clean. Shake well before use. SurfaPore W is ready to use; no need to dilute before applying. Apply SurfaPore W by brush, roller or spraying. Maximum performance is reached 24h after application. In case of very absorptive surfaces, reapply within 2 hours. Application temperature: 10-35oC (50-95oF).
Coverage: 8-10 m² per Liter, strogly dependant on the properties of the surface applied.
Wood Stain or Varnish Application: Let SurfaPore W cure for at least 72h before application. Applying wood varnish or stain on a SurfaPore W treated surface might affect their colour or adherence. Test results on a small area before full scale application.