Photo-catalytic Self-Cleaning Nanotechnology for the Protection of Porous Surfaces
SurfaShield C is applied on porous surfaces and decomposes organic stains and pollutants, prevents microbial growth, puriﬁes the air, removes odours. By harnessing the surrounding light, treated surfaces become Self Cleaning and Self Sterilising.
SurfaShield C is a nanotechnology liquid formulation, that provides effective self cleaning and self sterilizing properties on a wide range of porous building surfaces. By harnessing nanotechnology achievements, effectiveness, continuous action and minimal change to the original natural appearance of the application surface are assured. SurfaShield C acts by absorbing surrounding light and transforming it in chemical power. Bacteria, viruses, mould, gaseous pollutants, odours, stains they all decompose and break down to harmless inorganic compounds. Thus the application surfaces remain actively clean. The treated surfaces become super-hydrophilic and as a result pollutants are washed away. SurfaShield C also acts as an air puriﬁer as it decomposes harmful organic substances such as volatile organic compounds (VOC), car exhaust fumes and nitrogen oxides (NOx).
Walls, stones, cement, grout, render, plaster, mortar, unpolished marble.
Surface Application: Shake or stir the container vigorously before use. The application surface should be dry and clean. Apply SurfaShield C with a brush, roller or spray gun. No dilution is required. If any excess remains on the application surface, remove by using a wet cloth. On very absorptive surfaces re-apply a second coating. The application of SurfaPore C or SurfaPore M 24h prior to SurfaShield C application is recommended, in order to reduce water or stain penetration.
Consumption: Estimated consumption rate 8-10 m²/L, strongly dependent on the properties of the surface applied.