On a clean and dry surface follow these steps:
Apply SurfaPore C using a roller or by airless spraying for the complete surface waterproofing.
24 hours after the SurfaPore C application, apply waterproofing SurfaPaint thermodry elastomeric Roof Paint for maximum waterproofing and thermal insulation. Stir well before applying. Fill the large hairline cracks (>2mm) by bridging gaps with a suitable acrylic putty or coat with polyester-impregnated fabric (gauze).
Surfaces are primed with SurfaPaint thermodry elastomeric Roof Paint and diluted with equal amounts of water. (dilution ratio 1:1).
Prime the surface using the diluted SurfaPaint thermodry elastomeric Roof Paint.
Using a good quality roller, apply the first coat (without thinning) at least 5 hours after priming.
Apply the second coat (without thinning) at least 24 hours after application of the first coat, in cross directions i.e. one horizontally and the other one vertically.
Complete waterproofing is achieved 7 days after application.